PRODUCTS
Warning: Cannot modify header information - headers already sent by (output started at /www/wwwroot/fs-zhuodi.com/comm/top.php:62) in /www/wwwroot/fs-zhuodi.com/comm/left.php on line 2
The machine only request worker to press the button ON/OFF. When suck the slab,through the proximity switch to give the signal to sucker machine to achieve the automatically suck the slab and discharge the slab.The procedure for sucking is trough the photoelectric tube control,the whole process without man control,all are automatic control by program.It only take 1 minutes to suck the slab to the rolling table which reduce the labor intensity effectively. The sucker loader can rotate 180 degree which is suitable for remove the vertical or horizontal slab storage. Base on the request ,can storage the slab with surface & back side. On the meantime it can walk automatically which is suitable for storage the slab with a certain distance. Power : 7.1KW
This Kind of Revolution Polishing machine is the latest one discovered by Zhuodi, which escape the traditional design.
Swing beam adopt double crank mechanism which is driven by the double helical gear reducer, with frequency control.
By adjusting the length of the crank to change the Swing beam width, smooth operation,no impact,which can enhance the glossy of polishing.
After polishing,the slab is very glossy and flat,no arc dark marks. The waterproof door adopt the automatic lifting which effectively reduce the labor intensity and ensure the safety of workers. This products own the independent intellectual property rights.
| Technical Parameters |
equipment name
|
Type
|
Grinding heads
|
Grinding heads power
|
Swing power
|
Main driving power
|
Water consumption
|
Gas consumption
|
Dimension(mm)
|
Polishing machine
|
ZDTG1650
|
12
|
11KW
|
2X4KW
|
3KW
|
400L/min
|
260L
|
12700X3300X3001270
|
The frame length is : 5300MM to ensure the stability of the slab . Adopt 2 synchronous belt & synchronous wheel transmission to control the slab diagonal errors . 2 sets of fixed cutting device set up horizontally ,2 sets of cutting heads can be lateral movement to adjust the blade for different width of slab. Set up the cylinder device to ensure the uniform cutting ,no big heads . With one cut ,2 side cut forming ,high efficiency ,high quality .
| Technical Parameters |
Equipment Name
|
Type
|
Edge Cutting Power
|
Driving Power
|
Lift Power
|
Weight
|
Cutting Dimension(mm)
|
Dimension(mm)
|
cutting machine
|
ZDZQ1650
|
7.5KW
|
1.1KW
|
0.37KW
|
2.5T
|
1400-1700
|
5300X3000X1600
|
cutting machine
|
ZDZQ800
|
7.5KW
|
1.5KW
|
0.37KW
|
2T
|
670-800
|
5300X2400X1600
|
Pure bright is a used for machining surface of quartz stone plate device, it can be infiltrated ultra protective material (adhesion) on the surface of tiles, so that through the quartz stone plate surface after processing has a very good brightness. Pure bright characteristics:
1.by adjusting the protective material formula, quartz stone plate surface can make the processed has antibacterial, antiseptic and self-cleaning effect.
2.By using this equipment, the production speed of up to ~10m/min;
Quartz stone plate surface gloss. After nano polishing production line processing can be up to 90 degrees, close to the mirror effect, and the antiskid effect and processing and is very close to the front.
The surface of the equipment is suitable for stone thickness setting processing: This machine adopts the high speed rotating diamond disk rigid milling processing on the surface of the plate, so that the plate to get a balance of surface and the same thickness, thereby greatly improving the polishing yield and quality, reduce processing costs.
Technical Parameters
|
ltem
|
Roller heads
（a）
|
Work width（mm）
|
Work thickness(mm)
|
Conveying speed(m/.mim)
|
Conveyor motor power(kw)
|
Swing motor power(kw)
|
The grinding head motor power(kw)
|
Water consumption (L/min)
|
ZYD800
|
4-10
|
600-800
|
10-40
|
0.5-5
|
1.5-3
|
4
|
18.5
|
210
|
ZYD1650
|
6-10
|
600-1660
|
10-40
|
0.5-5
|
2.2-5.5
|
2 ×4
|
18.5
|
320
|
The Belt Type distributor is used for multi-color and long vein design slab.
The water-fall distributing system and high precise weighing device is introduced into the weighing system. Compare to the traditional manual feeding system, this full-auto feeding system has high efficiency, materials distributing uniformly and homogeneously. Avoid the later deformation because of the uniform density of the slab caused by uneven materials distribution.
